High efficiency Environmental protection Paint remover Price
Product Description
Description
Application
Instructions | |
1 | 1.Immersion type: all the workpieces that need to be stripped are immersed in the paint stripper for 0.5-5 minutes. The old paint film will swell strongly and bulge. All of them fall off. After taking out, use the high-pressure water to remove the residual paint on the surface of the workpiece and wash it with water. |
2 | brush type: for large workpieces can be applied to the paint parts by brush or cotton yarn, for the thick film of the workpiece, can be repeatedly painted 2 - 3 times, until the paint film falls off, the post-cleaning process is the same as the immersion. |
3 | When immersing, put the agent in the anti-corrosion container, add appropriate amount of water to seal the agent to prevent evaporation. Different processing times due to different resins. Apply directly to the surface of the paint film when applying, and the paint film will slowly swell up. |
Precautions
1. When using this product, the operator must wear rubber gloves. 2. If the paint is accidentally splashed on the skin or clothing during use, it can be cleaned with the company's mitigating agent to relieve the effect of the paint remover. Wash with water, refer to the instructions for use of the mitigator for specific use. 3. Transport according to general liquid chemicals, store in dry and ventilated place, and store temperature in winter is not lower than -10 °C..
Product Categories : Metal Finish Products > Metal Rust Remover